IRANTEX 2017

4 - 7 September in Teheran

Visit Mahlo at booth No. 8, Hall 41

Irantex Logo

Our team is looking forward to meeting you at booth No. 8, Hall 41 in Teheran. Get information about the latest trends and developments in an ambitious market.

Int. Exhibition of Textile Machinery, Raw Materials, Home Textiles, Embroidery Machines & Textile Products

As early as the 1970s, Germany had close trade relations with Iran. The former Islamic Republic even became the second most important exporting country outside of Europe. Today, as a consequence of the step-by-step reduction of the sanctions imposed on exports to Iran, trade and industry are reconnecting again. That also applies to the textile machinery market. In order to keep up with their foreign competitors, Iranian textile industrials have to invest in their factories. By that, the textile industry with its long tradition - according to governmental information, there are about 10 000 factories with 290 000 employees - shall remain competitive. The Iranian manufacturers favour German technology.

The IRANTEX trade fair, the oldest exhibition for textile machinery and products, is an excellent platform to network and intensify existing relations. About 700 exhibitors for textile machinery, raw materials, home textiles, embroidery machines and textile products present themselves in Teheran in September.

More Information about IRANTEX: www.irantex.com

Mahlo at Irantex

Mahlo-technology for the Iranian Textile Market

Welcome to our booth at IRANTEX 2017!

In the Iranian textile market, we focus on straightening Technologies with our weft straightener Orthopac RVMC. Another focus lies on energy saving systems like our process control for stentering frames, Optipac VMC, or our drum dryer control Atmoset SMT.

Featured Mahlo products at IRANTEX 2017

Optipac VMC-15

A most effective process control for stenter frames

Optipac VMC-15
Optipac VMC-15

A modular system for measuring, logging and controlling critical process parameters such as dwell time, thread density, residual moisture, m2-weight and exhaust air humidity, etc. across the full width of the product.

This modularly designed process control system, intended mainly for monitoring stenter frames, consists of a number of various modules for measuring and controlling specific process parameters. The system can be expanded at any time depending on need and investment budgets!

The precise monitoring and control of drying processes results in potential energy savings of up to 30%. Productivity and quality of the product are increased and reproducible.

Product highlights Customer benefits
 
  • Online monitoring and control of all relevant parameters
  • Modular system architecture
  • Easy to retrofit
 
   
  • Increased productivity
  • Optimised quality assurance
  • Optimised process repeatability
 

Available Sensors

Dwell / Fixing Time Thread count g/m2 weight Residual Moisture
Permaset VMT: Sensor for product temperature Famacont PMC: Sensor for thread count Gravmat FMI: Sensor for weight per unit area Textometer RMS: Sensor for residual moisture
Permaset VMT > Famacont PMC > Gravimat FMI > Textometer RMS >

 

Exhaust Air Humidity Product Width
Temperature Profile
Stretch / Shrinkage
Ecomat AML: Sensor for exhaust air humidity Wilot WMR: Sensor for product width Thermoscan OMF: Sensor for product temperature profile Elotex DMG: Sensor for product stretch & shrinkage
Ecomat AML > Wilot WMR > Thermoscan OMF >

Elotex DMG >

 

Moisture Profile
     
Textodrive TMS: Sensor for residual moisture profile      
Textodrive TMS >      

Product information (PDF)

Atmoset SMT-15

Optimising the heat output of drum dryers depending on the product

Atmoset SMT
Atmoset SMT

Drum dryers can be found in many production and finishing plants in the textile industry. They dry the product after wet treatment.

Drum driers are normally designed for the heaviest product and therefore usually overdimensioned. Heavy products are dried just correctly, but all other products are overdried. Enormous amounts of energy are thus wasted.

The Atmoset SMT enables a stable and effective drying process. The optimal degree of drying is always reached, regardless of the weight of the product or the web speed. Continuity of the production process and reproducibility of the product quality are ensured.

The energy consumption of the dryers drops significantly due to the optimised heat output. This saves energy costs.

Product highlights Customer benefits
 
  • Stable and effective drying process
  • Easy to retrofit
  • Easy to install
 
   
  • Optimised energy efficiency
  • Energy saving
  • Increased process repeatability
 

Product information (PDF)

Your contact

Adnan Andac, Area Sales Manager Near and Middle East, Turkey, Egypt, Pakistan, Bangladesh, Eastern Germany

Adnan Andac

Area Sales Manager
Near and Middle East, Turkey, Egypt, Pakistan, Bangladesh, Eastern Germany  

adnan.andac@mahlo.com

Tel.: +49-9441-601-117
Fax: +49-9441-601-166

Exhibiton profile

Exhibition: IRANTEX 2017
Booth: No. 8, Hall 41
Country: Iran
City
: Teheran
Venue: Teheran Permanent Fairground
Date:  04 - 07 Sept 2017
Link: www.irantex.com