Weft straightening the way it should be ...

The Orthopac RVMC is the universally employable straightening system from Mahlo for the correction of fabric distortions for nearly all applications.…

Bow and skew detection and control

The Orthopac FMC automatic straightener is the heart and core of the Orthopac. The device consists of an optical scanning system and electronic control for…

Fine-tune straightening of residual distortion

This model represents a compact fine-straightening system for the correction of residual distortions. The special strength of the Orthopac MFRC is…

Fine-tune straightening for heavyweight fabrics

The special strength of the Orthopac GMFRC is the extremely high straightening accuracy at relatively small distortions. Thanks to reinforced…

Heavy-duty weft straightening

The heavy duty version. High demands due to large product widths (e.g. carpet) or dimensionally stable textiles with defined skew settings (e.g. denim) require a…

When the going gets rough ...

The Orthopac CRVMC is especially designed for high mechanical load. Thanks to reinforced components, it is ideal for processing very heavyweight and wide…

Precision straightening machine

Control and actuation at the same time: The Orthopac RXVMC is the only straightening system worldwide to offer this unique combination. This completely new…

Removing all types of distortions

The fusion of pin wheel and roller straightening technology perfectly combines the advantages of both technologies and provides amazing straightening results.…

Removing irregular distortions

Asymmetrical distortions (wavy, S-shaped, etc.) in textiles have always represented a huge challenge in the textile industry. A special straightening approach is…

Optimizes finishing

The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The…

Optimizes drying

The Ecopac EMC uses the state of the art microprocessor technology to ensure product quality and optimise the energy balance for drying processes. The modular system for…

Optolectronic sensor / camera sensor

The Famacont PMC determines the thread density by means of a non-contacting, optoelectronic or imaging process. With the optoelectronic process individual…

Transmission of beta rays

The weight monitoring and control system measures the weight continuously, without contact, destruction-free and on moving product. The measurement is based on the…

Reflexion of infrared light

Automatic width measurement on a running product web. IR LEDs used in reflective mode continuously and precisely determine the product width. The sensor module only…

Condensate temperature control

The Atmoset SMT regulates the residual moisture of the tissue with steam-heated cylinder dryers. The deviation of the condensate temperature from a preset…

Automatic control of thermal diebolts of extrusion dies

The DieControl APC Pro automatically controls thermal bolts of extrusion dies according to the earlier measured cross-section profile of…

Pattern and distortion control
The leading pattern detection system using camera technology. The repetitions of printed, woven or tufted patterns are evaluated according to certain algorithms…

The mLog software is an application for data logging and interactive analysis of historical data for Mahlo equipment. The desktop application runs on an office PC and provides a comfortable…

Keeps web safely on track

Drifting of the product web lateral to the running direction of product is unavoidable in some stages of textile finishing. The Ceremat system brings the product back…

The mLog software is a data logging application for Mahlo equipment. The desktop application runs on an office PC and provides comfortable creation and archiving of PDF protocols of running…

mPilot is a control room application for Mahlo equipment. The software allows the user to configure up to ten Mahlo devices with one control centre. Individually selected data of several devices…

Ionisation of the air

The Antistat AMW ioniser for trouble-free processing of synthetic materials and of textiles with high charge separation. By ionising the ambient air, the electrostatic…

Measurement of steam

Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring…

Infrared pyrometer

The Thermosense HP270 is used for non-contacting temperature measurement in driers and stenters and records the temperature of running product webs. The sensor is…

Web process control

The Qualiscan QMS is a modular system for measuring, logging and controlling critical process parameters over the entire width of the product, including basis weight,…

The Textometer DMB is a mobile handy device for measuring moisture on textile webs and bobbins on a wide variety of versions. It determines the moisture content of raw materials, semi-finished…

Compressed air blade

To monitor the progress of certain processes, there is no alternative but to take frequent samples at the machine itself.

This is normally possible only while the product…