Igatex Pakistan 2018

26 - 29 April 2018 in Lahore, Pakistan

Visit Mahlo at hall 5, booth A-5-01 - B-5-05

Your are very welcome to our booth A-5-01 - B-5-05 in hall 5 at the Igatex in Lahore. We run a joint stand together with our honored partner Al Ameen. Experience Mahlo's latest technologies in textile finishing and drying processes and discuss with us your individual challenges.

International Exhibition for Garment and Textile Machinery

Igatex Logo

Located at the crossroads of Asia, Pakistan has become a focal point for Investors and has in recent years, gained recognition as an important market among other textile manufacturing countries of the region.

IGATEX Pakistan takes place from 26 - 29 April 2018 at the Expo Lahore. It is a professionally enriching experience for textile manufacturers, providing them an opportunity to directly experience cutting egde technology textile machinery.

Weft straigheners and textile process control systems from Mahlo

Be our guest at the Igatex 2018 in hall 5 at booth nos. A-5-01 to B-5-05, a joint booth with our partners Al Ameen Trading.

In Pakistan and the South Asian market we give emphasis to straightening technologies with our weftstraightener Orthopac RVMC. Another focus is on energy saving concepts such as the stenter process control system Optipac VMC or the drum dryer control system Atmoset SMT.

For detailed information about the trade show itself please visit the website: http://igatex.pk/

Featured Mahlo products at Igatex 18

Optipac VMC-15

A most effective process control for stenter frames

Optipac VMC-15
Optipac VMC-15

A modular system for measuring, logging and controlling critical process parameters such as dwell time, thread density, residual moisture, basis weight and exhaust air humidity, etc. across the full width of the product.

This modularly designed process control system, intended mainly for monitoring stenter frames, consists of a number of various modules for measuring and controlling specific process parameters. The system can be expanded at any time depending on need and investment budgets!

The precise monitoring and control of drying processes results in potential energy savings of up to 30%. Productivity and quality of the product are increased and reproducible.

Product highlights Customer benefits
  • Online monitoring and control of all relevant parameters
  • Modular system architecture
  • Easy to retrofit
  • Increased productivity
  • Optimised quality assurance
  • Optimised process repeatability

Product information (PDF)

Atmoset SMT-15

Optimising the heat output of drum dryers depending on the product

Atmoset SMT
Atmoset SMT

Drum dryers can be found in many production and finishing plants in the textile industry. They dry the product after wet treatment.

Drum driers are normally designed for the heaviest product and therefore usually overdimensioned. Heavy products are dried just correctly, but all other products are overdried. Enormous amounts of energy are thus wasted.

The Atmoset SMT enables a stable and effective drying process. The optimal degree of drying is always reached, regardless of the weight of the product or the web speed. Continuity of the production process and reproducibility of the product quality are ensured.

The energy consumption of the dryers drops significantly due to the optimised heat output. This saves energy costs.

Product highlights Customer benefits
  • Stable and effective drying process
  • Easy to retrofit
  • Easy to install
  • Optimised energy efficiency
  • Energy saving
  • Increased process repeatability

Product information (PDF)

Your contact
Adnan Andac, Area Sales Manager Near and Middle East, Turkey, Egypt, Pakistan, Bangladesh, Eastern Germany

Adnan Andac

Area Sales Manager
Near and Middle East, Turkey, Egypt, Pakistan, Bangladesh, Eastern Germany  


Tel.: +49-9441-601-117
Fax: +49-9441-601-166

Exhibiton profile

Exhibition Igatex 2018
Mahlo Hall 5 / A-5-01 to B-5-05
Country Pakistan
City Karachi
Venue Karachi Expo Center
Date 26 - 29 Apr 2018
Link http://igatex.pk/