Qualiscan QMS-12 Bestseller
Traversing quality control system
Web process control
The Qualiscan QMS is a modular system for measuring, logging and controlling critical process parameters over the entire width of the product, including basis weight,…
Show details
Optipac VMC-15
Modular process control system
Optimizes finishing
The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The…
Show details
Ecopac EMC-15
Process control system for drying processes
Optimizes drying
The Ecopac EMC uses the state of the art microprocessor technology to ensure product quality and optimise the energy balance for drying processes. The modular system for…
Show details
Atmoset SMT-15
Drum dryer control optimises heating performance
Condensate temperature control
The Atmoset SMT regulates the residual moisture of the tissue with steam-heated cylinder dryers. The deviation of the condensate temperature from a preset…
Show details
Ecosense ZS-12
Control of exhaust air humidity
Measurement of steam
Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring…
Show details
Textometer DMB-15
Portable moisture meter
The Textometer DMB is a mobile handy device for measuring moisture on textile webs and bobbins on a wide variety of versions. It determines the moisture content of raw materials, semi-finished…
Show details
Aqualot AMF
Measurement of moisture
Microwave damping / phase shifting
The Aqualot AMF sends microwaves through the moist product web. The water in the product causes damping and phase shifting of the microwaves. The material…
Show details
Aqualot HMF
Measurement of moisture
Microwave resonance
The Aqualot HMF use microwave technology to measure moisture without contact. The system measures regardless of the composition of the water, pH value changes in the…
Show details
Infralot IMF
Measurement of moisture / organic compound
Absorption/reflexion of infrared light
Infralot IMF uses optical evaluation of the absorbed/reflected light energy in the near-infrared range to continuously measure and control material…
Show details
Infrascope NIR
Measurement of basis weight (mass per unit area) / moisture
Absorption of infrared light
The Infrascope NIR monitors the absorption of infrared energy of all components on or in the web in the near infrared range. Measuring over the entire spectrum…
Show details
Ecomat AML
Control of exhaust air humidity
Measurement of steam
Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by…
Show details
Textometer RMS
Control of residual moisture
Measuring electrical conductivity
Moisture retention (residual moisture) is an important criterion in terms of later finishing, finished product scrap and energy optimizing. Electrodes…
Show details