Qualiscan QMS-12 Bestseller
Traversing quality control system
Web process control
The Qualiscan QMS is a modular system for measuring, logging and controlling critical process parameters over the entire width of the product, including basis weight,…
Show details
Optipac VMC-15
Modular process control system
Optimizes finishing
The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The…
Show details
Ecopac EMC-15
Process control system for drying processes
Optimizes drying
The Ecopac EMC uses the state of the art microprocessor technology to ensure product quality and optimise the energy balance for drying processes. The modular system for…
Show details
Famacont PMC-15
Control of thread density / course density / basis weight
Optolectronic sensor / camera sensor
The Famacont PMC determines the thread density by means of a non-contacting, optoelectronic or imaging process. With the optoelectronic process individual…
Show details
Gravimat FMI-15
Control of basis weight / thickness
Transmission of beta rays
The weight monitoring and control system measures the weight continuously, without contact, destruction-free and on moving product. The measurement is based on the…
Show details
Wilot WMR-12
Measurement of product width
Reflexion of infrared light
Automatic width measurement on a running product web. IR LEDs used in reflective mode continuously and precisely determine the product width. The sensor module only…
Show details
Atmoset SMT-15
Drum dryer control optimises heating performance
Condensate temperature control
The Atmoset SMT regulates the residual moisture of the tissue with steam-heated cylinder dryers. The deviation of the condensate temperature from a preset…
Show details
Diecontrol APC Pro
Automatic Extrusion Die Control System
Automatic control of thermal diebolts of extrusion dies
The DieControl APC Pro automatically controls thermal bolts of extrusion dies according to the earlier measured cross-section profile of…
Show details
Antistat AMW-12
Discharge system for static charge
Ionisation of the air
The Antistat AMW ioniser for trouble-free processing of synthetic materials and of textiles with high charge separation. By ionising the ambient air, the electrostatic…
Show details
Ecosense ZS-12
Control of exhaust air humidity
Measurement of steam
Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring…
Show details
Thermosense HP270
Measurement of the fabric temperature
Infrared pyrometer
The Thermosense HP270 is used for non-contacting temperature measurement in driers and stenters and records the temperature of running product webs. The sensor is…
Show details