Special weft straightener for carpets and technical textiles
Due to the unique straightening roller control, the fabric always touches the straightening roller over the entire width. The result: no wrinkling and an uniform straightening result.
When the going gets rough ...
The Orthopac CRVMC is especially designed for high mechanical load. Thanks to reinforced components, it is ideal for processing very heavyweight and wide materials.
The arc of contact of the straightening rollers thereby depends on the desired straightening effect. With products without skews and bows, the straightening rollers are not enveloped unnecessarily.
When the straightening rollers engage with the product, the uniform contact of the straightening rollers with the product is ensured over the entire width. This becomes possible through our innovative and unique roller positioning drive.
- Reinforced construction; large roller diameter
- Suitable for tensional forces of up to 3 kN
- Working widths up to 5400 mm possible
- Maintaining tight distortion tolerances
- Avoiding complaints
- Improved customer relationship
An Orthopac CRVMC is especially designed for high mechanical loads. In particular, the specially reinforced drive unit for roller positioning ensures perfect straightening even under the highest product tension loads.
The system also features a solid, reinforced frame design, reinforced roller bearings as well as larger diameters of bow and skew rollers scanner unit. Electronics, display and operating station, etc. correspond to the design of the Orthopac RVMC; all scanner heads are adjustable.
The system can process very low (carpet) but also very high product speeds up to 100 m/min (technical textiles). It is also available as manual unit. It can subsequently be retrofitted with a scanner (normal or hybrid) or a Patcontrol PCS pattern detection without problems.
CRMM Straightener: Manual straightening machine without optical scanning system and control